- Contact Person: Mr. Jack Chen
- phone: 86-573-83692605
- mobile:
- fax: 86-573-83698635
- zip:
- Street Address: North Side(4/F, 1th Building, Wanli Petrochemical limited liability company), No. 4 bridge, Chengnan Road, Economic Development Zone
Jiaxing Jinchang Electron Technology Co., Ltd.
Products
Product Search
Basic Information
- Jiaxing Jinchang Electron Technology Co., Ltd.
- Number of Employees: 201 - 300 People
- Year Established: 2009
- Main Markets: North America Eastern Europe Southeast Asia Oceania
- Legal representative: Gaobo Chen
- Business Type: Manufacturer, Agent, Business Service (Transportation, finance, travel, Ads, etc)
(Manufactory) GPS Auto Passive Tracker Antenna
Supplier:
Jiaxing Jinchang Electron Technology Co., Ltd.
Description of (Manufactory) GPS Auto Passive Tracker AntennaCar Antenna
:
3 electrical characteristics 3.1 dielectric antenna form 1
3.2 mechanical form 2
4 reliability condition:temperature: 40±5°c load: dc=5v±0.5 v quantity: 2000pcs sustained time: 48h 5 environmental specifications post environmental tolerance (refer to the form 1~2 ) condition:temperature range 25±3°c relative humidity range 55~75%rh operating temperature range -40°c~+85°c storage temperature range -40°c~+85°c 5.1 moisture proof the device should satisfy the electrical characteristics specified in form 1~2 after exposed to the temperature 40±2°cand the relative humidity 90~95% rh for 96 hours and 1~2 hours recovery time under normal condition. 5.2 vibration resist the device should satisfy the electrical characteristics specified in form 1~2 after applied to the vibration of 10 to 55hz with amplitude of 1.5mm for 2 hours each in x , y and z directions. 5.3 drop shock the device should satisfy the electrical characteristics specified in form 1~2 after dropping onto the hard wooden board from the height of 30cm for 3 times each facet of the 3 dimensions of the device. 5.4 high temperature endurance the device should satisfy the electrical characteristics specified in form 1~2 after exposed to temperature 80±5°cfor 24±2 hours and 1~2 hours recovery time under normal temperature. 5.5 low temperature endurance the device should also satisfy the electrical characteristics specified in form 1~2 after exposed to the temperature -40°c±5°cfor 24±2 hours and to 2 hours recovery time under normal temperature. 5.6 temperature cycle test the device should also satisfy the electrical characteristics specified in form 1~2 after exposed to the low temperature -25°c and high temperature +85°c for 30±2 min each by 5 cycles and 1 to 2 hours recovery time under normal temperature. 6 weatherproof put the antennas in 1m deep water for 12h, and find 100% waterproof.
Until now there are 1 people viewed this product Featured Products From Jiaxing Jinchang Electron Technology Co., Ltd.
|




